Introduction
Water and charging ports don’t mix.
If you’ve ever had the misfortune of getting water in your device’s charging port, then you know that it can be a frustrating experience. Water causes corrosion and damage to the circuitry within the charging port, which can lead to serious problems with your device.
Unfortunately, the only way to get rid of the water is to remove it yourself. Fortunately, we have put together this guide to help you get water out of your device’s charging port quickly and safely. We’ll walk you through the process step-by-step, so that you can get back up and running with minimal fuss.
So let’s get started! Read on to learn how to get water out of a charging port safely and quickly.

- Introduction
- What to Do as Soon as You Spill Water on Your Charging Port
- Safety Considerations When Cleaning Your Charging Port
- What Materials You Need to Dry Out the Charging Port
- Tips and Tricks for Drying Out the Water
- Common Mistakes People Make When Drying Out a Phone’s Charging Port
- How to Prevent Water From Getting Into Your Charging Port
- Conclusion
What to Do as Soon as You Spill Water on Your Charging Port
If you’ve spilled water on your charging port, the first step is to act quickly and ensure the port isn’t still wet. Unplug your device from any power sources and turn it off immediately. Leaving the device on or plugged in when it’s wet could risk damaging circuits beyond repair.
Then, use a cotton swab or toothpick to remove any visible liquid or debris from within the charging port. This should be done carefully as to not damage any of the delicate components inside. If there is a lot of debris stuck in the cord, use compressed air to blow out water trapped inside.
You may want to let your device dry for ten minutes after this before attempting any further action, like using a vacuum cleaner or a hair drier to extract more liquid from inside your device. This will help make sure that no moisture remains and that all debris has been removed from the charging port before proceeding with other methods.
Safety Considerations When Cleaning Your Charging Port
Water in the charging port of your device can be a major issue and cause it to stop working altogether. It is important to take care when attempting to get water out of your device’s charging port.
To avoid any additional damage to your device, here are some safety considerations when cleaning your charging port:
- Unplug the device before you start: Make sure the device is turned off and unplugged from any power source before attempting to clean it.
- Do not attempt to dry with heat: Never try to use heat from a hairdryer or other sources of warmth as this may cause further damage, both esthetic and functional.
- Be gentle: Use a household item like a soft cloth or cotton swab dipped in distilled water or alcohol/vinegar solution, but do not insert anything into the port that could cause more damage.
- Avoid liquid contact: Liquids can cause more damage if they enter the device’s charging port so make sure that you keep liquids away from it while cleaning.
Taking the necessary precautionary steps and exercising caution while cleaning your charging port will help ensure that you do not cause any further damage and will ultimately save you time and money.
What Materials You Need to Dry Out the Charging Port
When water finds its way into your charging port, you need the right tools to ensure it is completely removed. The materials you’ll need are:
- A tool to open up the device
- Cotton swabs and toothpicks to access deep inside the port
- Isopropyl alcohol (60-90%)
- Compressed air can
- Hairdryer
- Vacuum cleaner (optional)
Using these materials, you can get any water out of your charging port and reduce further damage to the device. Start by carefully disassembling the device and identifying where the water has gotten in. Once you’ve located it, use a toothpick or cotton swap dipped in isopropyl alcohol to absorb any liquid, followed by a quick blast of compressed air to make sure all residue is removed. Finally, use a hairdryer set on low power to dry out any remaining moisture, or a vacuum cleaner if available (but be careful not to suck up any tiny parts). Once you’re finished, reassemble your device and it should be functioning again as normal!
Tips and Tricks for Drying Out the Water
Water in your phone charging port is a real problem, but it doesn’t have to ruin your phone. With the right tools, some patience and a few simple steps, you can get the water out before any permanent damage is done.
Tips for Drying Out the Water
- Using a Hair Dryer: Before attempting to use a hair dryer, make sure to turn off your device and remove your charger and battery if possible. Once everything is off and disconnected, set the heat setting to low and angle the hairdryer directly at the charging port. Work the hair dryer around on all sides of the port for 15-20 minutes.
- Vacuum Sealer Method: Another great way of getting water out of the charging port is using a vacuum sealer. To begin, plug a vacuum cleaner’s hose into the charging port, making sure that it forms an airtight seal so that no air can escape from within the phone’s internals. Turn on your vacuum cleaner for about 30 seconds and be sure not to move it during this time period since doing so could cause further damage.
- Rice Method: This is one of the most popular methods for fixing wet phones due to its simplicity and accessibility. Place your phone in an airtight container full of uncooked rice for at least 24 hours before turning it back on and plugging in a charger to see if it works properly again. Be sure not to use cooked or boiled rice since it could leave residue inside your device!
Common Mistakes People Make When Drying Out a Phone’s Charging Port
When faced with a wet charging port, many people make the same mistakes, which can lead to long-term damage and decreased phone performance, so knowing how to safely remove water is important.
Using Liquids to Clean the Charging Port
Using liquids to clean charging ports is an all-too-common mistake – while it may appear that they are helping to dry out the port, these liquids can actually cause further corrosion and damage sensitive components.
Using Heat Sources to Dry Out the Port
Using heat sources such as hairdryers may seem like a logical option for removing water from a phone’s charging port, but this can actually cause even more damage than using liquids. Heat sources dissipate the liquid quickly and dangerously, making it difficult for parts of the device to cool down. This can lead to permanent damage of sensitive components.
Inserting Foreign Objects into the Port
Inserting foreign objects or cotton swabs into the charging port is another common mistake that should be avoided at all costs. Doing so can cause irreparable damage to electronic components inside your device and disrupt watertight seals.
The best way to ensure that any internal water has been removed from your charging port is by using a specialized vacuum cleaner attachment or compressed air spray specifically designed for this purpose. Doing this will help you avoid further damaging your device or voiding warranties by using inappropriate cleaning materials.
How to Prevent Water From Getting Into Your Charging Port
Keeping water out of your charging port can be difficult, but it’s essential if you want your device to stay safe. Here are a few tips on how to prevent water from getting into your charging port:
Use a Waterproof Case
Investing in a waterproof case is one of the best ways to protect your device from water damage. Not only will it keep any liquid away from the charging port, but it will also provide extra protection for other sensitive components such as the battery and processor.
Make Sure the Port Is Covered
When you’re not using the device, make sure the port is covered by either a dust plug or waterproof flap. This helps to prevent water from seeping into the port when it’s exposed to rain or other wet conditions.
Keep Your Device Above Water Level at All Times
If you’re around water, make sure to keep your device above the surface level for maximum protection. Keeping it close to your body or in a pocket is also recommended as this will provide additional insulation against any sudden splashes.
Conclusion
While it may seem like an impossible task, getting water out of your charging port doesn’t need to cause a headache. With the right techniques, you can get the job done without damaging your device. Start by locating the charging port, turning off your device, and using a vacuum cleaner to gently suck the water out. If that doesn’t work, you can try using a Q-tip to mop up the remaining water and use a fan and a container of silica gel to dry out the inside of the port. Lastly, make sure the port is completely dry before attempting to charge your device. For the next time you find yourself in a similar situation, remember that there are ways to get water out of your charging port without doing any harm.